HO Plǎs Mortar Additive

Mortar Additive


PLASTER & MORTAR PLASTICIZERHSL HO plǎs is a ready to use plasticizing powder addictive added to plaster or mortar mixture to increase it’s workability & adhension strength. It conforms to BS4551 (mortar plasticizing additives) and is suitable for use in interior and exterior areas such as general purpose repair mortar, wall plastering, foor screeds and masonry mortar for laying bricks and block walls.

Advantages
  • User Friendly
  • Easy Handling
  • Enhanced Workability
  • Enhanced Adhension
  • Minimize Shrinkages
  • Minimize Cracks
  • Minimize Wastages
  • Optimum Plasticity
  • Cost Effective

Methods

  1. Prepare your usual plaster or mortar mixture.
    Guaging water should be reduced between 5 to 10% from a normal mixture.
  2. Add the required amount of water to the mortar mix and sprinkle in a sachet of HO plǎs powder additive, homogenize it until a change in consistency is obtained.
  3. Add in sand to get mix consistency for desired application.
    (plaster, screed or masonry mortar).
  4. When the consistency of a homogeneous past is achieved, the mixture is ready for use.


Recommended Mixing Ratio

Brick Plastering Floor Screeding Mansonry Mortar
Ho Plǎs 1 sachet(±130gm) 1 sachet(±130gm) 1 sachet(±130gm)
Water 30 litres 30 litres 30 litres
Sand 200 kg 300 kg 400 kg
OPC Cement 1 bag (50kg) 1 bag (50kg) 1 bag (50kg)


Product Inquiry

Fill the Correct value*

8 x 3 =